Raise your Query
Hi! Simply click below and type your query.
Our experts will reply you very soon.
Hi! Simply click below and type your query.
Our experts will reply you very soon.
| Business Type | Manufacturer, Supplier, Retailer, Wholesaler |
Preferred Buyer From
| Location | Anywhere in India |
CPL Resin Coated Plywood is manufactured using imported Gurjan / Kuring, timber veneer, bounded with high quality Phenol Formaldehyde Synthetic Resin conforming to IS : 848-I974 under high pressure and temperature. CPL Resin Coated Plywood is immune to severe climatic conditions and the effects of cold, warm and boiling water. CPL Resin Coated Plywood is very dimensionally stable and extremely and can be used number of times to save your shuttering cost.
Technical Data
Loading and Deflection : By taking the maximum permitted deflection as I: 270 (viz. 1/2 70 of the span between the bearers). The following data gives the maximum loads per sq. meter :
(a) When the face grain of CPL Shuttering Resin Film Densified Wood plates is parallel to grain bearers.
| Centre Distance to bearer | 30 cm (12)" | 40 cm (16)" | 50 cm (20)" | 60 cm (24)" | |
| Loading (kg. / sq.m.) | 9 mm | 980 | 450 | 250 | 160 |
| 12 mm | 1650 | 700 | 540 | 230 | |
(b) The face gain of the CPL Resin Coated Plywood is perpendicular of bearers :
| Centre Distance to bearer | 30 cm (12)" | 40 cm (16)" | 50 cm (20)" | 60 cm (24)" | |
| Loading (kg. / sq.m.) | 9 mm | 1600 | 700 | 425 | 250 |
| 12 mm | 2750 | 1127 | 845 | 490 | |
The above loads apply when concrete is laid on CPL Resin Coated Plywood as in slabs and beams. The same thickness of concrete in a wall can be held without excess deflection by using even thinner Marine plywood panels, the following are the minimum bending radii of CPL Resin-Film Densified wood Plates when dry :
| Thickness | Across to grain of the outer ply | Parallel to the grain |
| 9 mm | 210 cm | 350 cm |
| 12 mm | 290 cm | 435 cm |
